Part Description: 000A0076 - Stand 01, 5 leg 40 inch (1016mm) with casters
Part Description: 000A2610 - Stand 02, 5 leg 40 inches (1016mm) with casters and bushing mount
(000A1868 needed to mount ventilator)
000A0076 Stand #1 Five leg, 40" tall with casters. For permanent mounting.
As our most popular option, this stand has a plate welded to the top of the column. To mount the ventilator on the plate, first remove the four rubber feet with a Phillips screwdriver. Now place the ventilator onto the plate and screw the feet back on from underneath the plate to hold your machine securely in place. Should you decide later you'd rather place the ventilator elsewhere, you will still have the four rubber feet for a countertop option.
000A2610 Stand #2 Five leg, 40" tall with casters and bushing mount.
Pictured above, Stand #2 has a bushing at the top of the column with a locking hand screw. The bushing has a 5/8" hole in it to accept our mounting arm
(PN 220A0083) and mounting plate
(PN 000A1868). This stand is useful if you have an anesthesia machine on which the ventilator is normally mounted with the mounting arm and/or plate but on occasion you would like to place it on a stand.
Either stand provides quick and easy mobility for the ventilator that must serve multiple operating rooms.